Looking for Hay? See our companion site. http://www.perfecthay.com.
cache/wst.opf.4790829.xml
ABOVE 8 PICTURES ARE (Before) DETAILED CLEANUP AND NEW FRONT WINDSHIELD.
NEXT 18 PICTURES ABOVE ARE (during) DETAILED CLEANUP.
cache/wst.opf.4796668.xml
cache/wst.opf.4806637.xml
cache/wst.opf.4808121.xml
Above are last Group of JCB 550 Telehandler pictures.

2004 JCB Model 550 Telehandler
INFORMATION  Before and After          

Even though this machine has 6000 Hrs on it the maintenance has been done professionally by Brian at DMI  in Sioux Falls SD. Periodically and on time in a regular basis!!!

Therefore the only reason for selling this machine was to update it to a new machine for the previous owners!!! They never had the time to clean up this machine and it had a lot of masonary mud splattered over it most everywhere and it’s appearance wasn’t the best?? AS THE [8] “BEFORE “ Pictures on the web will indicate. These pictures were taken to email to MDS Mfg. Inc. at Parkston, SD so they could determine what type of Manual Quick attach it had on the front so they could price me an adaptor attachment from the JCB too a skid loader accepter one so all skidloader attachments would fit it. It would have cost $1600.00. We accidently broke the front windshield when a large  long handled sledge hammer fell off of the wooden pallet on the forks and hit the front windshield!!!I ordered a new one from the local JCB dealer in Norfolk,NE Dinkel Implement, The Ford New Holland dealer and it will get replaced next week at Hagge Glass here in Bloomfield. NE. 68718 [The new one is here in the original box at my home here.

I immediately started cleaning and test driving this machine. EVERYTHING WORKED PROPERLY And I could not find any leaks anywhere at all as I was teaching myself Little-by-little how to operate this huge  machine. I ordered a new OPERATORS MANUAL and the  back door plate Latches that were bent and missing along with [2] missing handles for the latches on this rear plate. They have yet to come because of the Holiday season at hand.

Everytime the weather is warm enough to apply masonary cement remover to this machine I do it---let it work for about 30 minutes ,then take it to the pressure washer with heat & soap and remove another area of masonary cement and it works quit well!!! I removed the whole Quick attach that accepted the Large Pallet Forks[5”x 3”x 48” long] & Shaft  and took that whole unit to the sandblaster at Pro Auto in Yankton ,SD, Blasted that and the rear plate with latches and returned here with it, Primed& painted it and have yet to reinstall it until I clean more cement off of the front accepter shaft. My intentions are to repeat this cleaning process over and over until I’m satisfied as this machine is Mechanically sound!!! Starts and runs great and deserves better care then it has gotten over the last several years!!! 

I took the whole manual Quick-Attach assembly off of the front and had it sandblasted and repainted 12/29/2016. I’ll do the same to the Pallet Forks [5” wide by 3” thick by 48” long] this all will appear to look like new also when finished and when”AFTER” pictures are taken for the website.

       Some Helpful Information can be obtained from Previous Owners & Maintenance people!!!

Maintenance Records: DMI Inc. Diesel Machinery Inc., 4301 North Cliff Ave. Sioux Falls, SD.57104

Email: dmisf@dieselmachinery.com     Toll free: 888-753-8907      FAX: 605-336-9503

  I Ordered [2] Brand new 17.5 X25 [12 ply] tires for the front as the left front one seemed to continue to leak air and I think supposed to have fluid in all 4? Therefore, I Told the Person to make sure he had 2 more new tires to match  these first 2 in case the future buyer wants it to have all [4] new [matched tires with fluid in them??? So I could have all this done right here in Bloomfield, NE. at Bloomfield Tire & Oil. BTO has 2 brand new tubes on hand here now so in about week to 10 days these should be mounted and closer toAnother group of pictures now after all [4] wheels and rims are cleaned  and painted ready for sale!!!Really hard to get a picture of it when extended as high as it will go [wont fit] so  now with the new 8 ft wide working platform cage[aluminum/w tool box] we just took a picture of what will fit ?Also a picture of All [4] new tires and repainted wheels and the motor etc.
Therefore, now can go to “Tractor House” construction equipment and click on Telehandlers   All JCB 550’s to see some like it and their values elsewhere. NOTICE !! Diesel Machinery Inc. [DMI] in South Dakota, They have some advertised at their three Dealerships that compare to this one. 

The seat pads are getting brand new covers on them and should be done shortly. I’m waiting for a brand new Jet, windshield washer nozzle for the top windshield and it should be here also in a week to 10 days?

AN EXTENSIVE AMOUNT OF CLEANING AND DETAILED TOUCH-UP WORK IS GETTING DONE WHEN-EVER WEATHER PERMITS ON THE CAB INTERIOR AND EVERYTHING IN THE CAB [SWITCHES, CONTROLS, ETC.] HAVE ALL ALWAYS WORKED PROPERLY SINCE I HAVE HAD IT!

Another group of pictures now after all [4] wheels and rims are cleaned  and painted ready for sale!!!Really hard to get a picture of it when extended as high as it will go [wont fit] so now with the new 8 ft wide working platform cage[aluminum/w tool box] we just took a picture of what will fit ?Also a picture of All [4] new tires and repainted wheels and the motor etc.
Therefore, now can go to “Tractor House” construction equipment and click on Telehandlers   All JCB 550’s to see some like it and their values else where. NOTICE !! Diesel Machinery Inc. [DMI] in South Dakota, They have some advertised at their three Dealerships that compare to this one. 



2004  JCB 550 Telehandler
SN:  SLP5506AEA1039903

Optional Equipment

[A.]  4 X 4 Cab/Air/Heat

[B.] Hydraulic Outriggers 

[C.] Manual Quick-attach forks

[D.]  Joystick/shuttle 4spd. Trans. (LH REV)

[E.]  Crab-crawl  [3], Frt steer/Rear steer/All Steer

[F.]  10,000 Lb. lift capacity

[G.]  Hyd. Tilt & Angle Equipped

[H.]   Front and Rear Heavy Duty Fenders [Non-corrosive, HD Plastic!]

[.I.] Operators Manual (Original) [location] with clerk @ auction!   ”RARE” For buyers only)

[J.] Parts Manual (Original) [location]-with clerk @ auction!   ”RARE” (For Dealer)

cache/wst.opf.4799983.xml
BUHLER FINISHING MOWER
cache/wst.opf.4790828.xml
cache/wst.opf.4783540.xml
Rhino SR20M Bat-Wing shredder, 1000 RPM Constant Velocity PTO, [6] foam-filled tires, [6] hydraulic hoes (for individual wings), new chain shields front, and rubber belting rear. Field ready! (NICE!) 
SN 11064
cache/wst.opf.4737423.xml
MIscelaneous Loader attachments and International Loader from 656
cache/wst.opf.4493869.xml
Various John Deere Tractor and Skid-Loader attachments.
cache/wst.opf.4530386.xml

New 7 and 9 foot on hand.

The Pequea Fluffer Tedder's unique action gently lifts and releases hay with minimum damage to leaves. Labor saving, it allows you to aerate hay as a last step before baling or chopping. The Fluffer Tedder gives you better control over how your hay dries no matter how you put it up and allows air to move through your hay for faster drying so the cure is uniform. This is an all-around ideal unit for farmers who insists on high-quality forage.

710, 910 Fluffer Tedders

  • Ground drive or PTO
  • 8 adjustable reel settings
  • Dependable double belt drive
  • Rubber mounted finger action
  • Unique cam mechanism adjusts tine angle as bars turn
  • Tines gently lift and release forage
  • Minimizes damage to chopper heads from stones picked up during raking
cache/wst.opf.4530386.xml
cache/wst.opf.4530389.xml
This 5 foot wide unit fits Category II 3-pt's and requires 2 sets of hyd's,as it hydraulically adjusts out to the right side of the tractor and also tips upright hydraulically to mow along angled ditch ways etc. Very nice unit that adjusts to any type of difficult areas to mow[since it's a flail type unit it hardly ever plugs up and it chops it all into a really fine residue for more frequent mowing of the same area's over and over.$4500.00

info@perfecthay.com


cache/wst.opf.4530391.xml
Will fit Category II and III 3-pt.Only reason for selling my tractor isn't large enough to handle this 9 foot 2 inch cut mower and have purchased a smaller one.It's in above average condition and knives have been used a little but would be ready to grease and go mow. $7250.00 here in Bloomfield,NE.

info@perfecthay.com



Model J D "KBL" 7 or 8 foot 3-Point!!! [ RARE Completely dismantled, cleaned, straightened an all parts individually painted the proper color , all the proper JD  scrapers installed properly and reassembled where ever new bolts required. All new grease zerks installed and machine greased and ready to work or use [but it probably should be put into a Museum!][ Really nice for any JD collector!!!!] Make an offer!
Cell number 402-640-1306 email: info@perfecthay.com
    
IHC 7-foot sickle mower. Model C-21 or C-24
2-pt fast hitch {Not sure if it has ever been used} Sickle, guards, pitman stick all still brand new Very Rare Professionally restored and kept inside.
Cell number 402-640-1306 email: info@perfecthay.com
Heavy Duty 3-pt. for '06 Series IHC tractors
(706,806,1026,1206)
Cell number 402-640-1306 email: info@perfecthay.com

mailto:info@perfecthay.com

 

© 2013 HobbyFarmTractors
PO Box 554 * 221 North Broadway* Bloomfield, NE 68718
 1975 Chevrolet C60 Straighttruck
cache/wst.opf.3804272.xml
Website Builder